furnace heat exchanger

Signs Your Furnace Heat Exchanger Has Gone Bad

NEGLECTED CONCERN: Warnings that the heat exchanger in your furnace has failed

What is a Heat Exchanger?

Various residents have no idea what heat exchangers are or where they are located in their property unless something goes horribly wrong among one. Whenever your furnace is in efficient working order, it’s easy to overlook the heat exchanger, which is the furnace’s main component. Furnaces employ heat exchangers to deliver warm air throughout your house. It is a key component of your heating system, and any problems with it will not only cause your furnace to fail, but will also pose major hazards to your home’s health and safety. 

In order to generate heat, your furnace uses combustion gas in a sealed chamber. The heat exchanger plays an essential role in preventing potentially harmful gasses from entering the blower, which is responsible for distributing warm air throughout the ducts and vents in your home. Considering heat exchangers contain flue gas, they must be free of holes, cracks, and other degradation. This sort of degradation, which allows flue gas escape and mixing with the heated air, can lead to inadequate combustion and the creation of carbon monoxide as well as other dangerous byproducts. Although the furnace may not instantly emit carbon monoxide into your home, excessive CO levels make it dangerous to use. Something as simple as a blocked chimney or a damaged exhaust pipe might result in a fatal situation. In order for the heat exchanger to perform its function properly and prevent harmful pollutants from escaping, it is necessary for it to have a seal that is impermeable to air. This will keep pollution from entering the air that you breathe.

Problems with the Heat Exchanger: How to Recognize Them?

Unless your furnace is malfunctioning or your carbon monoxide alarm is going off, it is practically impossible to identify whether or not your heat exchanger has developed problems without doing a physical check or testing for CO. This highlights the need of doing routine inspections and maintenance on a consistent basis. Checking the furnace and carrying out a combustion analysis and CO test is the most straightforward method for determining whether or not it is secure to use.

US Air Conditioning and Heating provide quality services and staff that can check and fix your furnace to a top quality standard. Moreover, The said company provides professional and trained individuals to accommodate any problem that is to be considered in repairing. They sustained a reputation of reliable and responsible service and ethics that further signify a sense of professionalism towards clients. If any problems arise with your Furnace Heat Exchanger, US Air Conditioning and Heating is the best company to look for assistance to. 

The following indicators and statements illustrate the “INDICATIONS OF A DAMAGED OR BROKEN FURNACE HEAT EXCHANGER”: 

Abnormal Flame: Presence of Yellow/Orange Flame rather than Blue Flame

The blue color of the flames in a furnace is caused by the fact that the gas is ignited inside a chamber that is then shut off throughout the combustion process. The fact that the gas burners are producing yellow flames is evidence that there is a fracture in the heat exchanger. You need to get in contact with a qualified technician in your region as soon as possible to remove and fix the exchanger, flame sensor, and any other damaged components so that you can avoid a gas leak.

An accumulating mass of dirt in the Furnace Heat Exchanger

If soot and grime have built up in your heat exchanger, this might be an indication that the gas burner is slanted, that the exchanger is damaged, or that another issue of a similar sort is occurring. However, the US Air Conditioning & Heating company will come to your site, do a comprehensive examination of the unit, and then counsel with you about the best way to proceed.

Scents of Formaldehyde are coming from the Furnace.

Have you noticed that your home is starting to smell strongly of a chemical substance? Immediately place a call to a trained contractor to determine whether or not the aromas are being caused by formaldehyde fumes. These vapors are hazardous to the health of both your family and your pet (s). A specialist has the tools and equipment essential to examine and repair problems with the heat exchanger in your gas furnace. These problems may arise for a number of reasons.

The area surrounding the Furnace is beginning to Generate Water.

If condensation is to blame for the puddles that keep developing at the foot of your heat exchanger, you should not be concerned. If, on the other hand, the outside of your furnace is dry, you will need to do an examination to see whether or not the internal drain system is obstructed. In addition, it is essential to inspect the humidifier and the exchanger to see whether or not any of these components has been harmed.

Development of Cracks & Corrosion around the exterior of the Furnace

When a furnace approaches the middle of its life cycle, it is not unusual for it to begin exhibiting indications of degradation. This is to be expected. Even if a little bit of wear and tear on the access panel isn’t a major concern, the heat exchanger in your gas furnace falling apart might lead to a carbon monoxide leak. It is vital to engage a professional technician once a year to verify the gas valve, thermocouple, flame sensor, and electric igniter in your furnace. Additionally, it is also important to evaluate the other components of your furnace.

Why Choose US Air Conditioning and Heating Company?

The US Air Conditioning and Heating Company always follows through and never leaves a task until it is completed correctly and to the full satisfaction of the client. If for some reason anything goes wrong or if the customer is unhappy about something, you can depend on them to come back and make it right. Customers of U.S. Air Conditioning & Heating are offered the most cutting-edge technology and accessories currently on the market for total control and comfort. These include hybrid systems, UVC lighting air sterilizer, whole house air purification systems, energy recovery ventilators, electronic air cleaners, mist or steam humidifiers, zoning controls, infrared wireless and computerized controls & thermostats, humidistats, and dehumidification systems. This regulates the relative humidity inside of your house or place of business, preventing the growth of mold and mildew.

Hi, How Can We Help You?